Composition and Features of Ductile Iron Manhole Covers
Release date:
Dec 01,2021
Source:
Spheroidal graphite cast iron features graphite particles that are spherical in shape. Compared to flake graphite, spheroidal graphite causes less disruption to the metal matrix, allowing the cast iron to achieve 70–90% of the strength inherent in its matrix structure. This results in a tensile strength of up to 120 kgf/mm², while also providing excellent toughness. Typically, the chemical composition of ductile iron—excluding iron itself—includes 3.6–3.8% carbon, 2.0–3.0% silicon, and a total content of manganese, phosphorus, and sulfur no more than 1.5%, along with适量 of spheroidizing agents such as rare earth elements and magnesium.
Pig iron is an iron-carbon alloy with a carbon content exceeding 2%. Industrial-grade pig iron typically contains 2.5% to 4% carbon, along with elements such as C, Si, Mn, S, and P. It is produced by smelting iron ore in a blast furnace. Depending on the form in which carbon exists within the pig iron, it can be further classified into types like steelmaking pig iron, foundry pig iron, and ductile iron, among others.
Spheroidal graphite cast iron features graphite particles that are spherical in shape. Compared to flake graphite, spheroidal graphite causes less disruption to the metal matrix, enabling the cast iron to achieve 70–90% of the strength inherent in its matrix structure. This results in a tensile strength of up to 120 kgf/mm², while also providing excellent toughness. Typically, the chemical composition of ductile iron—excluding iron itself—includes 3.6–3.8% carbon, 2.0–3.0% silicon, and a total content of manganese, phosphorus, and sulfur no more than 1.5%, along with适量 of spheroidizing agents such as rare earth elements and magnesium.
Features:
Ductile iron manhole covers are primarily made from ductile cast iron, and the quality of these covers hinges on their spheroidal graphite content—specifically, the "spheroidalization rate." A common coating used for casting surfaces is anti-rust asphalt paint, and indeed, the surface of ductile iron manhole covers is also treated with this protective coating. One key advantage of ductile iron manhole covers is their superior strength and toughness, allowing them to be approximately 30% lighter than comparable gray iron manhole covers.
Characteristics of ductile iron manhole covers:
- Good toughness: Its impact value is significantly higher than that of medium-carbon steel—more than 10 times greater than gray iron materials.
- Highly corrosion-resistant: In a water spray corrosion test, the corrosion rate over 90 days was just 1/40th that of steel pipes and 1/10th that of gray iron pipes. Its service life is twice as long as gray iron pipes and five times longer than standard steel pipes.
- Good ductility: Elongation ≥7%, comparable to high-carbon steel, whereas gray iron exhibits zero elongation.
- High strength: Tensile strength őb ≥ 420 MPa, yield strength ős ≥ 300 MPa—equal to that of low-carbon steel and three times higher than gray iron materials.
Thanks to the spherical graphite microstructure of ductile iron, it outperforms cast steel in damping vibrations, making it more effective at reducing stress. An important reason to choose ductile iron is that it’s less expensive than cast steel. This lower cost makes ductile iron a more popular material, enhances casting efficiency, and further reduces machining costs compared to cast steel.
Ductile iron boasts strength comparable to that of cast steel. In fact, ductile iron exhibits a higher yield strength, with a minimum yield strength of 40 kpsi, whereas cast steel typically has a yield strength of just 36 kpsi. Moreover, in most municipal applications—such as those involving water, saltwater, steam, and other similar environments—ductile iron outperforms cast steel in both corrosion resistance and oxidation resistance.
Ductile cast iron, strength, pig iron, cast steel, graphite, yield, toughness
Other content
Nov 19,2026